Item NO. :
PLA HIPayment:
T/TPrice:
USD8-USD100Product Origin:
CHINAShipping Port:
SHENZHENLead Time：
CONTACT USProduct Item: PLA HI; High Impact PLA 3D Printer Filament
FEATURES
1. High impact strength. Great for mechanical parts fabrication.
2. Good post-printing processibility.
4. Balanced properties between ABS and PLA.
5. Minimize warping and easy to print.
MATERIAL PROPERTIES
| MATERIAL DATA SHEET | ||
| PLA HI | Unit | |
| Base Material | PLA | n/a |
| Diameter | 1.75//2.85 | mm |
| Diameter Tolerance | ±0.02/±0.03 | mm |
| Specific Gravity | 1.2 | g/cm3 |
| Tensile Strength |
|
Mpa |
| Impact Strength |
|
KJ/m2, Izod |
| Surface | Glossy | n/a |
| Transpancy | Opaque | n/a |
| Processibility | Fair | n/a |
| The data are intended as general guide only and do not necessarily represent results that may be obtained elsewhare. | ||
PRINTING PARAMETERS
| SUGGESTED PRINTING PARAMETERS | ||
| Filament Type | PLA HI | |
| Printer Type | Cartesian/Delta | |
| Extruder Type | Direct Drive/Bowden Tube | |
| Layer Height | 0.1~0.3 | mm |
| Fill Density | 0~100 | % |
| Shell Thickness | >0.4 | mm |
| Print Speed | 30~120 | mm/s |
| Printing Temperature | 190~210 | °C |
| Build Bed Temperature | 0~50 | °C |
| Retraction Speed | 20~50 | mm/s |
| Retraction Distance | 3~10 | mm |
| Cooling Fan | YES | |
have a question? you can call us or Email us by sending a message below..
HIPS
HIPS
HIPS
HIPS
HIPS
HIPS
Tel : 0755-84895589
Fax :
online service
